Kavon Filter Products Co.
5022 Industrial Road
Farmingdale, New Jersey 07727 USA

Toll-Free Phone: 1(877)KAVON US (528-6687)
Phone: (732)938-3135
Fax: (732)938-7540
Email: kavonfilter@optonline.net
Website: www.kavonfilter.com
Print Back
Conductive (Anti-Static) cloth is a synthetic material, most often a polyester, woven throughout with stainless steel wire or carbonized filament to dissipate static electricity. Non-conductive material is also usually polyester, but does not contain these metal wires or filaments and is therefore, ineffective in the dissipation of static electricity. Conductive (Anti-Static) is more commonly used in industrial applications. The addition of the wires and filaments has no affect on micron or porosity readings of the cloth. It is simply added to dissipate static electricity during the use of the material. Conductive (Anti-Static) cloth is most commonly used in the manufacture of replacement bags, socks, chutes and sleeves for fluid bed dryer equipment, high shear granulators, mixers, blenders, milling operations, hoppers and discharge chutes.

Non-Conductive Styles - The following specifications include only Conductive (Anti-Static) styles. Non-Conductive styles do not contain carbon or steel and are less commonly used. For specifications and further information about the Non-Conductive styles available please contact us.

HEAT RESISTANCE: Nylon 260 ºF / Polyester 275 to 300 ºF

CONDUCTIVE (Anti-Static) AND NON-CONDUCTIVE

Conductive (Anti-Static)

Unit of Measure

Specifications

Fiber

 N/A Multifilament Carbonized Polyester

Retention

 N/A 8 microns
Porosity1 N/A 20 - 30 CFM

Weave

 N/A Satin

Chemical Resistance

Acids

 N/A Good resistance to most mineral and organic acids except high concentrations of nitric, sulfuric and carbolic acids.

Alkalis

 N/A Good resistance to weak alkalis and moderate resistance to strong alkalis at low temperatures. Strong alkalis at high concentrations and temperatures dissolve polyesters.

Oxidizing Agents

 N/A Good resistance to most oxidizing agents.

Organic Solvents

 N/A Excellent to most organic solvents, but unsuited for some phenolic compounds and affected by cyclohexanone at 313 ºF.
  • 1 NOMINAL BASED ON ASTM STANDARD